1. Aiguille des heures
2. Aiguille des minutes
3. Bouton A
4. Couronne
5. Couronne - Premier clic
6. Couronne - Deuxième clic
7. Aiguille 24 heures
8. Bouton B
9. Affichage de la date
10. Aiguille de 24 heures à double fuseau horaire
11. Indicateur du jour de la semaine
12. Trotteuse

Définir la date: Mettre la couronne en position 5 et tourner.

Régler l'heure: Mettre la couronne en position 6 et tourner.

Régler l'heure (24 heures) : Mettre la couronne en position 6 et tourner.

**Régler le jour de la semaine : ** Mettre la couronne en position 6 et tourner. Faire tourner l'aiguille des heures plus de 24 heures vers l'avant changera le jour de la semaine.

**Pour régler le double fuseau horaire (pratique pour les fuseaux horaires différents) : ** Déplacez l'aiguille par incréments de 15 minutes en appuyant sur le bouton A (pour avancer) ou sur le bouton B (pour reculer).

• Mouvement : Miyota JP25 Quartz Multifonction
• Résistance à l'eau : 10 ATM / 100 mètres
• Fonctionnalités : date, fuseaux horaires multiples, format 24 heures, jours de la semaine
• Batterie : Sony SR621SW
• Verre : Verre minéral
• Matériau du boîtier : Acier inoxydable
• Matière du bracelet : Cuir véritable, Acier inoxydable
• Sans nickel : Oui
• Tour de poignet max : Cuir 21 cm, Acier 21,2 cm
• Tour de poignet min : Cuir 15,3 cm, Acier 17,1 cm
• Largeur du bracelet : 22 mm
• Diamètre du boîtier : 45 mm
• Diamètre du cadran : 37 mm
• Épaisseur du boîtier : 10 mm
• Hauteur de la couronne : 4 mm
• Entre-corne : 22 mm
• Distance corne à corne : 52 mm
• Poids : Bracelet cuir 80 g, Bracelet acier 150 g

Most watches have some level of water resistance. If your watch isn’t water resistant, it may be able to handle small splashes, but don’t risk it. If it has a leather band, don’t get it wet.

• Do not move the crown or push any buttons when your watch is in contact with water, as this may let water enter the case.
  
• If your watch is not water resistant, dip a cotton swab in a bowl of warm water with a drop or two of soap in. Squeeze the tip of the cotton swab to remove most of the water and gently rub the case.
  
• If your watch is water resistant, soak a soft cloth in a bowl of warm water with two drops of mild washing-up liquid added. Wring most of the water out of the cloth and gently rub the case with it.
  
  

Si votre montre en métal a perdu un peu de son éclat, vous pouvez la lui faire retrouver en la polissant à l'aide d'un chiffon en microfibre pour nettoyer les bijoux.

1. Essuyez doucement le bracelet et le boîtier pour éliminer toutes les tâches, poussières ou empreintes digitales.
2. Pour les zones telles que les gravures, les bords et autres endroits difficiles à atteindre, utilisez une brosse à dents souple.
3. Séchez toujours votre montre avec un chiffon doux ou une serviette après l'avoir nettoyée pour éliminer les agents polluants et éviter la formation de taches (d'eau ou autres).

As a rule of thumb, genuine leather shouldn’t get wet. This includes sweat and the moisture that evaporates from your body throughout the day, which is why we recommend you don’t wear your leather-strapped watch every day and always take it off when you go to sleep. 1. If you must clean your leather strap, remove it from the case and rub it down with a clean, dry cloth. 2. Apply leather cleaner and conditioner with a soft cloth, gently massaging the lotion into the leather. 3. Finish by wiping with a clean cloth to prevent staining and let the straps air-dry overnight.

Don’t wear it so tight that you have to bend the strap backwards to unbuckle your watch, as this can permanently deform the leather.

• Store your watch in a dark, dry place to avoid corrosion and discolouration of the dial.
• Always replace the battery on a quartz watch as soon as it runs out. With time, an empty battery may start leaking, damaging the watch’s movement.
• Run mechanical watches at least two days a year to prevent gears and cogs from sticking.
• You should always get your watch serviced by a professional every 3 years.

Rule of thumb: Make sure your watch is the last thing you put on and the first thing you take off.

• Take your watch off and store it safely before engaging in any activity that could damage it.
• Take it off before engaging in any activity likely to make you sweat.
• Take it off before you shower, bathe, or go for a swim.
• Take it off before cooking or cleaning.
• Take it off before you go to bed.
• Don’t expose your watch to chemicals such as cologne, sunscreen, perfume, chlorine, hair gel, etc., as these can discolour, stain, or dull surfaces.
• Try to store your watch separately in a soft enclosure to prevent scratching and rubbing.
• If your watch has closures or clasps, close these to prevent tangling.
• Keep your watch stored in a dry, dark place, and avoid heat fluctuation.

Certains bracelets en métal sont composés de maillons pliés dont le réglage nécessite l'usage d'outils professionnels. Visitez une boutique spécialisée pour faire régler la longueur de ce type de bracelets (effectuer ces manipulations par vous-même risquerait d'entraîner de griffer ou d'abimer votre bracelet).

To remove and change your watch strap, you’ll need:

• The watch
• A replacement strap
• A soft surface such as a cloth, t-shirt or mouse pad

You may also need:

• A spring bar tool
• Or a sharp pointed object

1. Place your watch on a soft surface. This prevents it from getting scratched or damaged.

2. If your watch has quick-release pins on the underside, push the small lever inward to release the strap.

1. If your watch has drilled lugs – small holes in the lugs extending from the main watch case – use a sharp, pointed object to push the spring bar in and release the strap. Be careful that the spring bar doesn’t slide out of the strap and get lost.

1. If your watch strap has neither of these, use a spring bar tool. This is a small tool with a v-shaped tip. Use it to compress the spring bar from the underside of the strap between the lugs on the right. Using the tool, push down the ridge of the spring bar to release the strap.

First, check the lug width of your new watch to verify that it’s 22 mm. You can find all our watch straps here. Using the filters, select only the matching width to see our selection for your watch.

If your replacement strap has quick-release bars, press the bar inward and slot it into place between the lugs. You’ll feel it ‘lock’ into position.

If your new strap doesn’t have quick-release pins, use the spring bar tool again. Place one end of the pin into place, then use the tool to compress the spring bar as you slot it in place. You’ll feel it ‘lock’ in position.

Remember to take your time and be careful not to scratch the lugs or damage the new watch strap.

If you take care of your watch and keep it stored correctly, you should enjoy years of timekeeping precision. But even with the best care possible, you may find that your watch needs extra attention from time to time.

Take a look at common issues with watches here. If you can’t find what you’re looking for, our great Customer Service Team is only a phone call away.

Pour que la garantie de votre montre reste valable, ne l'exposez pas à l'eau au-delà des limites recommandées et assurez-vous de conserver votre facture.